2004 honda cr 250 bogging when loaded - when my bike is reved under load it bogs out started by treadball
	April 6th 2010 at 11:27 PM Post #1
	treadball Starting Member 2 Posts Group: Members Member Since: April 6th 2010
	i took the reeds out checked for cracks and pulled the powervalve cover off and it seems to be ok. i also took the bowl off the carb it seemed to have gel in the bottom of it the bike will idle and rev fine until a load is put on it. i drained the old gas out and put a new plug in. any suggestions on what could be the problem? Rating: 0 Quick Edit Edit Topic

	April 7th 2010 at 6:35 AM  [ Modified April 7th 2010 at 6:35 AM ] Post #2
	Savage-CR Savage 153 Posts Group: Members Member Since: November 26th 2009 Current Dirtbike: I change this too much Sponsors: Tosca Banquet Hall
	Clean the sh*t out of your carb. Make sure you blow all the jets out. Rating: 0 Quick Edit Full Edit

	April 7th 2010 at 9:34 AM Post #3
	DarksideCR My givadamn broke and I aint fucking fixing it! 341 Posts Group: Members Member Since: July 4th 2008 Location: Kirkland lake, ONTARIO, Canada Current Dirtbike: 2000 CR250R Sponsors: Vortex
	What do you mean when a load is put on it? like when you sit on it? The honda revolution continues! Rating: 0 Quick Edit Full Edit

	April 7th 2010 at 2:17 PM Post #4
	treadball Starting Member 2 Posts Group: Members Member Since: April 6th 2010
	[quote=originally posted by DarksideCR] What do you mean when a load is put on it? like when you sit on it? [/quote like when you ride it and go from idle to wide open throttle. it dosent do it when you rev it in neutral Rating: 0 Quick Edit Full Edit

	April 7th 2010 at 6:21 PM Post #5
	MX86 What's this button do? 757 Posts Group: Moderators Member Since: June 5th 2008 Location: Nashwauk, MN, USA Current Dirtbike: 2006 Yamaha yz250 Race Number: 86 Sponsors: X-Brand, Gravity Worx
	does it just bog? or if you hold it long enough does it rev out? vids? Living Life 1 berm at a time. Rating: 0 Quick Edit Full Edit

	April 7th 2010 at 7:08 PM  [ Modified April 7th 2010 at 7:08 PM ] Post #6
	DarksideCR My givadamn broke and I aint fucking fixing it! 341 Posts Group: Members Member Since: July 4th 2008 Location: Kirkland lake, ONTARIO, Canada Current Dirtbike: 2000 CR250R Sponsors: Vortex
	well not a very accurate answer but a bogging bike is always one thing that was mentioned already. Clean out ur carb, take everything out and spray them down with carb cleaner and compresssed air. Put it all back together... Motocross bikes are the most simple engines, its so easy to find a problem. The honda revolution continues! Rating: 0 Quick Edit Full Edit

	April 7th 2010 at 8:12 PM Post #7
	MX86 What's this button do? 757 Posts Group: Moderators Member Since: June 5th 2008 Location: Nashwauk, MN, USA Current Dirtbike: 2006 Yamaha yz250 Race Number: 86 Sponsors: X-Brand, Gravity Worx
	1.) Check Compression 2.) Check your Carb and make sure all jets are correct and clean 3.) Check and make sure air box is clean and filter is clean 4.) Check electrical. Living Life 1 berm at a time. Rating: 0 Quick Edit Full Edit

	April 7th 2010 at 10:24 PM Post #8
	Rhythm Rhythm master 137 Posts Group: Members Member Since: July 5th 2008 Location: Porcupine Plain/Saskatoon, Saskatchewan, Canada Current Dirtbike: '03 YZ 250
	^^^I'm thinking one of the first three should solve the problem. '03 YZ 250 Tag bar clamps, titanium 200 foot pegs, Rental American Addition bars, RG3 suspenion, Hotwheels graphics, Griper seat cover, and Carlsbad tires. Rating: 0 Quick Edit Full Edit