Carb Help started by Antmanrida
	August 7th 2008 at 8:13 PM Post #1
	Antmanrida Captian Insano Jr 8 Posts Group: Members Member Since: August 4th 2008 Location: Worcester, Mass, USA Current Dirtbike: 02' Honda Cr 125r
	So today i got my bike all back together and cleaned the carb got the bike running and it was running very rich. so i started off by adjusting the air screw to not help. so i learned you need to adjust the needle by moving a clip in the carb. Does anyone know how to take the throtle cable off and get to this clip? 1 Down 5 Up Ride Up Rating: 0 Quick Edit Edit Topic

	August 7th 2008 at 8:17 PM Post #2
	edmonster to fat to 50 but doing it anyways! 196 Posts Group: Members Member Since: June 22nd 2008 Location: Ely, MN Current Dirtbike: custom pitbike Race Number: not needed Sponsors: dont need any
	unscrew the carb cap 50cc's of mayhem Rating: 0 Quick Edit Full Edit

	August 7th 2008 at 10:41 PM Post #3
	Kawi_Rider_316 Team Not Even Scared 632 Posts Group: Members Member Since: July 11th 2008 Location: Ocheyedan, Ia, USA Current Dirtbike: Kx 250F Race Number: 316 Sponsors: Spencer Motorsports
	like edmonster said, take the two screw's off the top and pull it off. Move the clip up 1 for a leaner mixture and put it back togather. "Jump for show, Corner for dough" "In ball and stick sports they give you the balls, In Motocross you have to bring your own" Sponsors: Glens Sport Center, FC MODS, MSR, Sunline, Tag, Filtron, Six Six One, Steel Mx, Dunlop, Rating: 0 Quick Edit Full Edit

	August 7th 2008 at 10:57 PM Post #4
	Antmanrida Captian Insano Jr 8 Posts Group: Members Member Since: August 4th 2008 Location: Worcester, Mass, USA Current Dirtbike: 02' Honda Cr 125r
	ok thanks i got it done and tommorow i can test it and hopefully everything will be done 1 Down 5 Up Ride Up Rating: 0 Quick Edit Full Edit

	August 8th 2008 at 9:58 AM Post #5
	MX86 What's this button do? 757 Posts Group: Moderators Member Since: June 5th 2008 Location: Nashwauk, MN, USA Current Dirtbike: 2006 Yamaha yz250 Race Number: 86 Sponsors: X-Brand, Gravity Worx
	well my first question is were is it rich? simply leaning out the needle aint going to make everything all better if the main is rich... Living Life 1 berm at a time. Rating: 0 Quick Edit Full Edit

	August 8th 2008 at 10:15 AM  [ Modified August 8th 2008 at 10:15 AM ] Post #6
	Antmanrida Captian Insano Jr 8 Posts Group: Members Member Since: August 4th 2008 Location: Worcester, Mass, USA Current Dirtbike: 02' Honda Cr 125r
	I was thinking it was running rich because when the pipe was changed before i got it and it was not jeted correctly 1 Down 5 Up Ride Up Rating: 0 Quick Edit Full Edit

	August 8th 2008 at 10:47 AM Post #7
	MX86 What's this button do? 757 Posts Group: Moderators Member Since: June 5th 2008 Location: Nashwauk, MN, USA Current Dirtbike: 2006 Yamaha yz250 Race Number: 86 Sponsors: X-Brand, Gravity Worx
	better double check your plug. don't wanna lean out the 2 stroke Living Life 1 berm at a time. Rating: 0 Quick Edit Full Edit

	August 8th 2008 at 11:00 AM Post #8
	Kawi_Rider_316 Team Not Even Scared 632 Posts Group: Members Member Since: July 11th 2008 Location: Ocheyedan, Ia, USA Current Dirtbike: Kx 250F Race Number: 316 Sponsors: Spencer Motorsports
	Ya I was ganna say that too is you might just need a leaner main jet. Thats what we ussually change before we mess with the needle. "Jump for show, Corner for dough" "In ball and stick sports they give you the balls, In Motocross you have to bring your own" Sponsors: Glens Sport Center, FC MODS, MSR, Sunline, Tag, Filtron, Six Six One, Steel Mx, Dunlop, Rating: 0 Quick Edit Full Edit

	August 8th 2008 at 10:46 PM  [ Modified August 8th 2008 at 10:47 PM ] Post #9
	James125 Smokers Rule 120 Posts Group: Members Member Since: June 18th 2008 Location: wasilla, ak, USA Current Dirtbike: 03 yz 250 Race Number: 357
	Quote Doesent the clip just helps zero to half throttle and the jets are above half so don't you want to change both. You dont want to lean it out though I leaned out a brand new motor just a little bit and the pos Wiseco kinda melted in less than two hours. 03 yz250 has a few bolt ons!! Rating: 0 Quick Edit Full Edit